DeautherX

Special 04K revision of ESP8266_Deauther with customizable Evil Twin attack, and WiFi signal strength checker, with a user-friendly web interface and Display interface and more. Чертежи для печати и инструкции по сборке в соседней ветке!!!

GITHUB

📔 Table of Contents

About the Project
Documentation
Password
Installation with Arduino IDE
Disclaimer
Variables

🌟 About the Project

This firmware allows you to easily perform a variety of actions to test 802.11 networks using an ESP8266. It's also a great project for learning about WiFi, microcontrollers, Arduino, hacking, and electronics/programming in general.

The deauthentication attack is the main feature, which can be used to disconnect devices from their WiFi network. Although this denial-of-service attack is nothing new, a lot of devices are still vulnerable to it. Luckily, this is slowly changing with more WiFi 6-enabled devices being used. But a lot of outdated WiFi devices remain in place, for example in cheap IoT hardware. With an ESP8266 Deauther, you can easily test this attack on your 2.4GHz WiFi network/devices and see whether it's successful or not. And if it is, you know you should upgrade your network.

To know more about deauthentication, visit WiFi Deauthentication Frame Explained.

📚 Documentation

Please visit the DeautherX docs for detailed information about this project. Here is quick link:

Home

https://blacktechx011.github.io/DeautherX_Docs/

🔒 Password

The password for ZeeXyL19-kv84 is 19841488.

🔧 Installation with Arduino IDE

Install the Arduino IDE.
Go to File -> Preferences -> Additional Boards Manager URLs and add:
https://raw.githubusercontent.com/BlackTechX011/arduino/main/package_BlackTechX_index.json
Go to Tools -> Board -> Boards Manager and install DeautherX ESP8266.
Open the DeautherX code folder.
Open DeautherX.ino with Arduino IDE.
Select the port.
Go to Tools -> Board -> Boards Manager and select your DeautherX board from DeautherX ESP8266 boards.
Click on upload.

⚠️ Disclaimer

Ревизия DeautherX специально для ОЧК НКСП.

⚠️ Variables

Автор оригинального репозитория гомогей и напихал в код кучу разных штук, которые по хорошему каждый хотел бы кастомизировать, но нигде не упорядочил. Так вот, список файлов, где есть некоторые настройки:

Форматирование при перезапуске: A_Config.h первые строки
Назначения кнопок: A_Config.h в ПЕРВОЙ секции buttons
Название и пароль от сетки: A_Config.h AP_SSID ; AP_PASSWD
ip точки: A_Config.h WEB_IP_ADDR
Светодиоды: led.cpp
Надпись при инициализации: DisplayUI.cpp: drawIntro() И DisplayUI.h: первые строки
Дефолтные названия фантомных точек: language.h SS_JSON_DEFAULT
Файлы сайта: webfiles.h НО там нужно гунить на байты

4.7 KiB Raw Blame History Unescape Escape