Special 04K revision of ESP8266_Deauther with customizable Evil Twin attack, and WiFi signal strength checker, with a user-friendly web interface and Display interface and more. Чертежи для печати и инструкции по сборке в соседней ветке!!!

GITHUB

📔 Table of Contents

About the Project
Documentation
Password
Installation with Arduino IDE
Disclaimer
Variables
Assembly scheme

🌟 About the Project

This firmware allows you to easily perform a variety of actions to test 802.11 networks using an ESP8266. It's also a great project for learning about WiFi, microcontrollers, Arduino, hacking, and electronics/programming in general.

The deauthentication attack is the main feature, which can be used to disconnect devices from their WiFi network. Although this denial-of-service attack is nothing new, a lot of devices are still vulnerable to it. Luckily, this is slowly changing with more WiFi 6-enabled devices being used. But a lot of outdated WiFi devices remain in place, for example in cheap IoT hardware. With an ESP8266 Deauther, you can easily test this attack on your 2.4GHz WiFi network/devices and see whether it's successful or not. And if it is, you know you should upgrade your network.

To know more about deauthentication, visit WiFi Deauthentication Frame Explained.

Чертежи для печати и инструкции по сборке в соседней ветке!!!

📚 Documentation

Please visit the DeautherX docs for detailed information about this project. Here is quick link:

Home

https://blacktechx011.github.io/DeautherX_Docs/

🔒 Password

The password for ZeeXyL19-kv84 is 19841488.

🔧 Installation with Arduino IDE

Install the Arduino IDE.
Go to File -> Preferences -> Additional Boards Manager URLs and add:
https://raw.githubusercontent.com/BlackTechX011/arduino/main/package_BlackTechX_index.json
Go to Tools -> Board -> Boards Manager and install DeautherX ESP8266.
Open the DeautherX code folder.
Open DeautherX.ino with Arduino IDE.
Select the port.
Go to Tools -> Board -> Boards Manager and select your DeautherX board from DeautherX ESP8266 boards.
Click on upload.

⚠️ Disclaimer

Ревизия DeautherX специально для ОЧК НКСП.

⚠️ Variables

Автор оригинального репозитория гомогей и напихал в код кучу разных штук, которые по хорошему каждый хотел бы кастомизировать, но нигде не упорядочил. Так вот, список файлов, где есть некоторые настройки:

Форматирование при перезапуске: A_Config.h первые строки
Назначения кнопок: A_Config.h в ПЕРВОЙ секции buttons
Название и пароль от сетки: A_Config.h AP_SSID ; AP_PASSWD
ip точки: A_Config.h WEB_IP_ADDR
Светодиоды: led.cpp
Надпись при инициализации: DisplayUI.cpp: drawIntro() И DisplayUI.h: первые строки
Дефолтные названия фантомных точек: language.h SS_JSON_DEFAULT
Файлы сайта: webfiles.h НО там нужно гунить на байты

⚠️ Assembly scheme